
The Casting Process
Cold-Chamber Die Casting
In cold-chamber die casting the molten charge (a calculated amount of material, more than is required to fill the casting) is added into a shot sleeve from the crucible, where a hydraulically operated plunger pushes the metal into the die.
Operating Sequence of the Cold-Chamber Die Casting Process
1
The die is closed and the molten metal is poured into the cold-chamber shot sleeve.
2
The plunger pushes the molten metal into the die cavity where it is held under pressure until solidification.
3
The die opens and the plunger advances, to ensure that the casting remains in the ejector die. Cores, if any, retract.
4
Ejector pins push the casting out of the ejector die and the plunger returns to its original position.
Operating Sequence of the Cold-Chamber Die Casting Process
1
The die is closed and the molten metal is poured into the cold-chamber shot sleeve.
2
The plunger pushes the molten metal into the die cavity where it is held under pressure until solidification.
3
The die opens and the plunger advances, to ensure that the casting remains in the ejector die. Cores, if any, retract.
4
Ejector pins push the casting out of the ejector die and the plunger returns to its original position.
Do you have a project?
Request a quote or give us a call!
Contact Us
Senah Inc.
66 First Street #4, Gilroy, CA 95020
Phone: (408) 374-1031
Looking for Microwave or RF Products. You came
to the right place! To see how we can help, click
below.

Contact Us
Senah Inc.
66 First Street #4, Gilroy, CA 95020
Phone: (408) 374-1031
Looking for Microwave or RF Products. You came to the right place! To see how we can help, click below.
